MIL-PRF-26539F
2.3 Non-government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN CHEMICAL SOCIETY (ACS)
ACS Reagent Chemical Standards
(Copies of these documents are available online at https://pubs.acs.org or the American Chemical Society,
1155 Sixteenth Street, NW, Washington, DC 20036.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS, INC. (ASTM)
ASTM E 29
Standard Practice for Using Significant Digits in Test Data to
Determine Conformance with Specifications (DoD Adopted)
(Copies of these documents are available online at https://www.astm.org or the American Society for
Testing and Materials, 100 Barr Harbor Drive, West Conshohocken PA 19428-2959)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Chemical composition and physical properties. The chemical composition and physical
properties of the propellants shall conform to Table I.
3.2 Limiting values. The following applies to all specified limits in this specification: For
purposes of determining conformance with these requirements, an observed value or a calculated value
shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification
limit according to the rounding-off method of ASTM Practice E 29, Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with Specifications.
3.3 Filter. A filter with a rating of at least 10 micrometer nominal and 40 micrometer absolute
rating shall be installed between the manufacturer's plant and the container to be filled for delivery.
3.4 Qualitative. The propellant shall be a clear, single-phased liquid when examined visually by
transmitted light according to 4.3.1. Type NTO shall be red-brown in color; type MON compositions shall
be green in color.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business