MIL-PRF-87930B
4.3.6 Iron. The iron content of the propellant shall be determined by one of the methods
described in Appendix D. In case of a dispute, the atomic absorption method (D.2.1) shall be the referee.
4.3.7 Non-volatile residue (NVR). The NVR of the propellant shall be determined in duplicate by
one of the methods described in Appendix E. In case of a dispute, the hot plate method (E.2.1) shall be
the referee.
4.3.8 Carbon dioxide. The carbon dioxide content of the propellant shall be determined by the
method described in Appendix F.
4.3.9 Other volatile carbonaceous material (OCVM). OVCM shall be determined by the gas
chromatographic method found in Appendix G.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD or in-house
contractor personnel, these personnel need to contact the responsible packaging activity to ascertain
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activities within the Military Service or Defense Agency, or within the Military Service's System
Commands. Packaging data retrieval is available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging
activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
6.1 Intended use. The propellant described by this specification is intended for use as fuel for
gas generators.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this specification.
b.
Quantity by weight in pounds (avoirdupois).
c.
When test methods are other than those specified (3.1).
d.
When a different sampling plan is required (4.2).
6.3 Safety Data Sheets. Contracting officers will identify those activities that require copies of
completed Safety Data Sheets (SDS) prepared in accordance with the 29CFR1910.1200.
6.4 Subject term (key word) listing.
Fuel
Gas generator
6.5 Changes from previous issue. Marginal notations are not used in this revision to identify
changes with respect to the previous issue due to the extent of the changes.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business