MIL-DTL-87107E
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers one grade of high density synthetic hydrocarbon type
propellant.
1.2 Classification.
Description
Grade
JP-10
High density hydrocarbon fuel, composed solely of
exo-tetrahydrodicyclopentadiene
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-313
Material Safety Data, Transportation Data and Disposal Data for
Hazardous Materials Furnished to Government Activities
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-85470
Inhibitor, Icing, Fuel System, High Flash NATO Code Number S-1745
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-290
Packing of Petroleum and Related Products
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robbins Avenue, Bldg 4D, Philadelphia PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM International
ASTM D56
Standard Test Method for Flash Point by Tag Closed Cup Tester (DoD
Adopted)
ASTM D93
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup
Tester (DoD Adopted)
ASTM D156
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt
Chromometer Method) (DoD Adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business