METRIC
MIL-DTL-87173B(USAF)
13 February 1998
SUPERSEDING
MIL-P-87173A(USAF)
23 June 1989
DETAIL SPECIFICATION
PROPELLANT, PRIMING FLUID, ALCM ENGINE, GRADE PF-1
Inactive for new design after 13 February 1998.
This specification is approved for use by the Department of the Air Force and is
available for use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers one grade of high-density hydrocarbon fuel. This specification was
thoroughly reviewed as a part of acquisition reform. While most of the requirements were converted to
performance terms, due to the military-unique nature of the product (see 6.1) and the need for
compatibility with deployed systems, it was determined that not all requirements could be converted. The
issuance of this specification as "detail" is not intended to constrain technology advances in future
systems.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2
Government documents
2.2.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS)
and supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: ASC/ENSI, Bldg 560, 2530 Loop Rd. West,
Wright-Patterson AFB OH 45433-7101, by using the Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document, or by letter.
AMSC N/A
FSC 9135
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business